scheduleForcedExit() sets process.exitCode which taints the bun test runner's
own exit code for the entire suite. This caused CI to fail even though all
tests passed individually.
Fix:
- Add __disableScheduledForcedExitForTesting / __enableScheduledForcedExitForTesting
seams to skip scheduleForcedExit() during tests
- beforeEach disables forced exit; afterEach re-enables
- The 'fallback exit timer' test explicitly re-enables to verify setTimeout/clearTimeout
- Remove process.exitCode and exitSpy assertions that required forced exit to be active
(shutdown call counts are sufficient to verify behavior)
The test file modifies process.exitCode and emits process signals which can
leak into bun test's exit code. Add:
1. mock.module() sentinel to route to isolated batch (following abort-with-timeout.test.ts pattern)
2. Global afterAll() hook that resets process.exitCode = 0 before test runner checks it
3. Remove direct checks of process.exitCode in assertions - only check that process.exit() was called with the right code via spy
This ensures bun test exits with code 0 even after tests verify process.exit behavior.
Fixes#3792
Property 'parentSessionID' does not exist on type 'LaunchInput' / 'BackgroundTask'.
The correct casing is 'parentSessionId' (camelCase with lowercase 'd').
Fixes CI build failure on dev branch.
Rename BackgroundTask and attempt ID fields to camelCase across background-agent consumers while moving BackgroundManager construction to a single config object.
Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent)
Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai>
When shutdown() itself emitted uncaughtException (e.g. EPIPE while closing
a broken pipe), the error listener re-entered itself, re-logged, re-ran
cleanup, and threw EPIPE again. The 6 s forced-exit timer could not fire
because every re-entry stalled the event loop with fresh synchronous work.
Users hit this after v3.17.5 and observed 100+ GB of log lines written to
disk within minutes, with one confirmed report of a 157 GB log file filling
the filesystem.
Detaching the listener with process.off() before running log() + handler()
breaks the loop at the first re-emit: the second event has no listener to
invoke, and the first invocation's scheduleForcedExit() proceeds normally.
CI test suite exited 1 despite 0 failing tests because process-cleanup.test.ts
assertions left process.exitCode=1 in place. The afterEach hook only reset to
originalExitCode (which starts undefined), not 0, so Bun picked up exitCode=1
on shutdown and reported the shared batch as failing.
Explicitly set process.exitCode = 0 in beforeEach and afterEach so each test
starts and ends with a clean exit state.
Signal handlers covered SIGINT/SIGTERM/SIGBREAK/beforeExit/exit, but a
synchronous throw or a top-level rejected promise terminated the process
without letting TmuxSessionManager (or any other registered manager) run
its shutdown hook. That reliably left orphan tmux panes after an opencode
crash.
Added registration for uncaughtException and unhandledRejection that fan
out through the existing cleanupAll() path, set process.exitCode = 1,
and arm the same 6 second forced-exit guard we use for signals. Test
helpers hold process-level spies so the new tests do not leak listeners
between runs.
Awaiting the tmux callback blocked the prompt for up to 10s (waitForSessionReady downstream). During that window the spawned pane ran 'opencode attach' against an empty session and rendered a blank TUI. Users saw 'pane created but attach not working'.
Start promptWithModelSuggestionRetry immediately after session.create, then invoke the tmux callback as fire-and-forget. The session becomes active before the attach client connects.
Ultraworked with [Sisyphus](https://github.com/code-yeongyu/oh-my-openagent)
Co-authored-by: Sisyphus <clio-agent@sisyphuslabs.ai>
Syncs the README translations, CONTRIBUTING, docs/reference,
docs/guide, docs/examples JSONC configs, and the hierarchical
src/**/AGENTS.md files with the model version bump already landed
in the source and migration commits.
Updates the canonical Anthropic Opus model in every fallback chain
(sisyphus, oracle, prometheus, metis, momus, visual-engineering,
ultrabrain, deep, artistry, unspecified-high), the unspecified-high
category default, the think-mode HIGH_VARIANT_MAP, the Claude Code
alias map, the claude-thinking legacy alias, the context-limit GA
regex, and event.ts fallback strings.
Widens supportsCachedAnthropicLimit to accept both claude-*-4-6 and
claude-*-4-7 so the 1M context cache still applies across the bump.
Regenerates the bundled model-capabilities snapshot from models.dev
and the model-fallback snapshot to match the new source output.
Address review feedback: add updateBackgroundTaskMarker() calls to
three additional terminal paths in BackgroundManager that were missing
marker cleanup, which could leave stale "active" markers and prevent
CLI run mode from exiting:
- processKey() startTask error handler
- handleEvent() session error (non-retryable)
- pruneStaleTasksAndNotifications() stale task cleanup
Closes#3452
When using `opencode run`, the process exits prematurely if the main
agent dispatches background subtasks. The CLI completion checker relies
on `session.children()` + `session.status()` APIs which cannot see
tasks in "pending" state (no session created yet) or tasks whose
sessions are momentarily idle between operations.
This fix bridges BackgroundManager state to the CLI completion checker
using the existing run-continuation-state marker system:
- Add "background-task" continuation marker source
- BackgroundManager writes/clears markers on task lifecycle events
(launch, cancel, complete, crash)
- CLI completion checker blocks exit when marker is active
- Fix todo-continuation-enforcer to also check "pending" task status
Closes#3452
resolveSubagentSpawnContext and related lookups called client.session.get
without the query.directory parameter, causing project-scoped sessions
to 404 under newer OpenCode SDK versions. Threaded directory through
SpawnerContext/BackgroundManager so all four call-sites pass it.
🤖 Generated with OhMyOpenCode assistance
https://github.com/code-yeongyu/oh-my-opencode
Anthropic API accepts claude-opus-4.6 (dot format) but not
claude-opus-4-6 (dash format). Added anthropic case to
transformModelForProvider to normalize dash-format model IDs before
they reach the provider. Updated model config snapshots and test
expectations to match the new dot-format output.
🤖 Generated with OhMyOpenCode assistance
https://github.com/code-yeongyu/oh-my-opencode
Update various modules to use centralized constants from plugin-identity:
- get-local-version/formatter: Use PUBLISHED_PACKAGE_NAME
- run/session-resolver: Use PUBLISHED_PACKAGE_NAME
- background-agent/task-poller: Use PUBLISHED_PACKAGE_NAME
- mcp-oauth/provider: Use PUBLISHED_PACKAGE_NAME
- auto-update-checker/constants: Use ACCEPTED_PACKAGE_NAMES
- comment-checker/downloader: Use PUBLISHED_PACKAGE_NAME
- legacy-plugin-toast/hook: Use PLUGIN_NAME
- shared/data-path: Use CACHE_DIR_NAME
- shared/external-plugin-detector: Use ACCEPTED_PACKAGE_NAMES
- shared/logger: Use LOG_FILENAME
- tools/ast-grep/downloader: Use PUBLISHED_PACKAGE_NAME
- tools/call-omo-agent/tools: Use PUBLISHED_PACKAGE_NAME
- tools/delegate-task/category-resolver: Use PUBLISHED_PACKAGE_NAME
- tools/grep/constants: Use PUBLISHED_PACKAGE_NAME
- tools/grep/downloader: Use PUBLISHED_PACKAGE_NAME
- tools/lsp/lsp-client-wrapper: Use PUBLISHED_PACKAGE_NAME
🤖 Generated with assistance of OhMyOpenCode
The depth limit (default maxDepth=3) was being silently bypassed when
sync-task.ts could not reach the manager's spawn enforcement methods --
the fallback hardcoded childDepth: 1, allowing infinite recursion of
delegate_task calls in degraded environments.
This was hard to catch because:
1. The fallback path took the dangerous default silently (no log).
2. There were no end-to-end smoke tests asserting that the depth value
coming back from reserveSubagentSpawn is actually used.
3. The unit tests for resolveSubagentSpawnContext only covered error
cases, not the actual depth calculation.
Changes:
- sync-task.ts: split the spawnContext fallback into an explicit if/else
with a WARNING log when the manager is missing enforcement methods.
This makes the dangerous path observable in logs.
- subagent-spawn-limits.test.ts: add depth calculation regression tests
(root, depth-1, depth-2, depth at max, parent cycle detection).
- sync-task.test.ts: add two regression smoke tests:
1. depth limit error from reserveSubagentSpawn must be propagated and
must NOT create the session.
2. spawnDepth recorded in metadata must equal what reserveSubagentSpawn
returns -- guards against silent fallback to childDepth: 1.
15 new spawn-limits tests + 2 new sync-task tests pass.
Full suite: 5105 pass, 0 fail.
YeonGyu-Kim